3d drawing glass of water step by step
Transparent glass is incredibly hard to depict from imagination. That'southward because we know it'due south "invisible", so what is there to describe? But the correct approach is to draw what we see, not what we know—and if glass can be seen, it can be drawn.
Y'all tin can follow this tutorial in two means. You can merely re-create my actions to create a cute, realistic cartoon of drinking glass, but yous can too read the explanations carefully to learn how to render glass things in the future exterior of this tutorial. The selection is yours!
What You Volition Need
- HB pencil
- 5B pencil (or annihilation much softer than HB)
- Ruler
- Eraser
- Pencil sharpener
i. How to Draw Thick/Solid Drinking glass
You can employ this lesson to create a solid drinking glass sphere or a glass stick.
Stride i
Describe a circle using the HB pencil. You can start with a cantankerous to achieve a perfect shape. Draw the lines lightly—this is just a base. The lines are nighttime in this tutorial and then that yous could see them clearly, but you should barely see them in your cartoon.



Step two
Extend the vertical line and describe the sides of the bottleneck.



Step 3
End the shape of the "solid bottle" by calculation a few perspective-defining ellipses.



Step four
Accept the ruler and draw a checkerboard background. Because we tin can meet glass past how it influences its background, this will be very useful for u.s..



Step 5
A solid sphere of glass works like a convex lens. This means we demand to enlarge the checkerboard fields within its outline. It tin exist hands done by turning the lines into ellipses. Kickoff, create a wide ellipse in the middle...



... then more ellipses around. Each one should be closer to the previous ane, until you reach the principal outline.



Step half dozen
Exercise the same with horizontal ellipses. Feel free to break the symmetry for a more than interesting result.



Step 7
Utilise the same rule in the clogging. This time draw lines, not ellipses, since a cross-section of a cylinder is a rectangle, not a circle.



Pace eight
Cross the lines with vertical ones. Y'all tin can accomplish a more natural outcome past breaking the symmetry again.



Footstep 9
Our "bottle" doesn't have an opening—there's a flat surface on top that'due south visible through the glass. And since nosotros see it through the glass, it must exist distorted.



Footstep 10
We have a kind of double baloney hither, so pause the rhythm:



Step 11
Here'due south a hard place. The drinking glass hither is thick and information technology has an irregular shape. The same matter would happen on the bottom of a real canteen. Yous tin skip this part if it'due south too difficult, simply it adds a actually nice upshot.






Pace 12
Time for the must fun affair: reflections! If your glass is a function of a scene, you must accommodate the reflections to the lighting in the scene. If non, feel free to create but whatsoever reflections that look practiced.
In my case, I've created a rectangular calorie-free that's reflected on the side...



... and then gets reflected (and enlarged!) inside the bottle on the other side.



Finally, I've added a set of rectangular lights over the bottle to create a lot of piddling reflections. Notice the reflection of the peak on the bottom!



Step 13
You lot can relax now, because everything is well defined and we can just finish it step past step. Tilt your pencil and fill half of the fields on one side with gray (on the left if you're right-handed and vice versa).



Stride 14
Have the 5B pencil, tilt it, and make full the other fields. Don't press too hard, only try to achieve a dainty dissimilarity.



Step xv
Now focus for a while to fill up the fields within the glass outline. Practise it field by field, trying to see them in the lines you've defined before. When you get within an area of reflection, press lighter.






Step 16
Now take the HB pencil again and fill the other fields. Keep the areas in light white.



Step 17
Do you remember that thick/irregular spot in the middle? Proceed it dark, with a tiny, tiny checkerboard design subconscious in it. If your glass had a tint of color, this is where information technology would be visible the about.



Step eighteen
At present do the same with the other half.






Stride nineteen
Finally, you can take the eraser and subtly smudge information technology over the reflections. Feel free to fix them with pencils also.



2. How to Describe Thin/Empty Glass
You can use this lesson to draw a drinking glass or an empty sphere.
Step 1
Start with the same bottle with a checkerboard background as before.



Pace ii
Define the thickness of the drinking glass by drawing the inside wall.



Step 3
This time it will be a niggling different. Draw the ellipses inside the outer circumvolve, only finish them abruptly in the inner circle.






All the ellipses should stay within the inner circumvolve.



Stride 4
Draw the lines in the bottleneck, once more only "within" the bottle.



Step 5
The border of the bottle'due south opening is visible through glass too, and then nosotros need to use the same trick as before.



Step vi
This time the opening is open up, then at that place's only i layer of drinking glass to see the groundwork through.



Stride 7
That difficult spot is even more difficult in an empty glass. Find how it seems to curve to the inside. Also, don't forget to draw the distortion within the wall—it's so tight that'southward it'southward all-time to draw it with uncomplicated lines.



Step 8
Time for reflections!



Step 9
At present the most pleasant part. Commencement, fill one one-half of the fields with a tilted HB pencil.



Footstep 10
Then fill the other half with a tilted 5B pencil.



Step 11
Fill up the little fields within the canteen. They should be really, really tiny near the wall. Keep them low-cal within the reflections.









Pace 12
Draw the distortion inside the wall with dark, thin lines. Keep contrasting white lines in between.



Step 13
Make that spot in the middle nighttime and thick.



Step fourteen
Take the HB pencil once more and fill up the remaining fields, keeping the reflections white.



Stride 15
Repeat the process for the other side of the picture.






Step 16
Yous tin employ the eraser to make the reflections popular.



Cute!
As you can encounter, glass isn't then difficult to draw one time y'all know how it all works! If you liked this tutorial, don't forget to bank check out more:



Source: https://design.tutsplus.com/tutorials/how-to-draw-glass--cms-27740
Post a Comment for "3d drawing glass of water step by step"